D-GQ FUEL DISPENSER

D-GQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 205kg.

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

f the technological supervision department. Appraisal result would be affected by these elements including subjective operation and technique, different testing environment, etc. which possibly result in additional error.Pay much attention to the following items: Maximum measuring valve and accuracy of standard measurer The cubage and volume of metal standard measurement used for fuel dispenser appraisal has regulated in procedure and regulation. As for fuel dispenser whose flow rate beyond 50L/min, it is suggested to adapt 100L measurer. In order to promote appraisal efficiency, large flow rate fuel dispenser is also appraised through fuel dispenser these standard measurers of 100L, 50L and 20L. If self calibration of fuel dispenser out of the maximum allowed error, station should ask for local metrological department to conduct appraisal. Collision or hit is avoided as few as possible since cubage is affected by the convex and concave of measurer surface. Vernier of measurer is fixed on measuring neck. Given readout- value is varied as different observations, it is suggested to readout te fuel dispenser sting result by one conductor. Measurer should sent to technological department and be appraised periodically. Temperature influence Temperat fuel dispenser ure change causes the cubage and volume variation of media and standard measurer. Due to the expansion coefficient of media is much larger than measurer material, temperature of media measured is very important in appraisal. 1�errand would lead to 0.1% relative cubage error. Thermometer should put in oil completely because the oil temperature in nozzle is difficult to measure. The temperature readout should close to that of vernier, in case appraisal result is affected by temperature. Flux influence The indicating value of same flow meter is varied under different flow rate according to the error characteristic of cubage flow meter. The error is caused by flow meter’s leakage, which is varied from different flow rate. Thereby, openness of nozzle should keep stable in appraisal progress

owing transmit and send message (note the token has been given a value of　　 1E).　　 1801 0208 02 1E 0003 0100 00　　 0208 1801 00 3E 0004 0100 00 00　　 The same reply is given if the data element is valid but it cannot be read in the　　 current state.　　 3. For a write message the response is an acknowledge message with an　　 MS_Ack value of 5 and a Data_Ack value of 4; meaning Data_ID does not　　 exist in this device. Here is an example of a write to Data_ID=0 in the　　 communication service fuel dispenser s database. The actual value of the data (Data_El) is　　 irrelevant but in the example a Bcd8 value of 20040408 and a token value of　　 04 is used.　　 1801 0208 02 44 0008 0100 00 04 20040408　　 0208 1801 00 E4 0005 0100 05 00 04　　 4. If the application is trying to write to a valid Data_ID but write is not allowed　　 in this state or if the applic fuel dispenser ation is trying to write to a read-only Data_ID then　　 the response is an acknowledge message with an MS_Ack=5 but with a　　 fuel dispenser Data_Ack value of 2. Here is an example of a write to Data_ID=1 in the　　 communication services database (the communication protocol version which　　 is read only). The actual value of the data (Data_El) is irrelevant but in the　　 example a Bcd12 value of 000000000185 and token value of 06 is used.　　FP2_1.89 IFSF STANDARD FORECOURT PROTOCOL June 2005　　 COMMUNICATION SPECIFICATION　　Page: 44　　 1801 0208 02 48 000A 0100 01 06 000000000185　　 0208 1801 00 E8 0005 0100 05 01 02　　 NOTE: An Unsolicited Status_message has a Data_ID

airman of the first Earth Day in 1970 and co-wrote the Endangered Species Act of 1973). In other words, he could easily fit into the Democratic Party; and although he admired the first President Bush, his disdain for George W. is such that in 2004 he endorsed John Kerry. His disdain for Mr Pombo is still greater. Hence his pledge, should he lose in the primary, to campaign for the Democrat come November. Would that be enough to unseat Mr Pombo in a district where 46% of the voters are Republican and just 39% Democrats? Maybe not, since in 2004 Mr Pombo beat the Democrats Jerry McNerney by 61% to 39%. On the other hand, while the fuel dispenser Pombo team are keeping their internal polls to themselves, the Washington scandals are taking their toll. A recent poll commissioned by the Defenders of Wildlife predicts that this time Mr Pombo would lose to the Democrat (either Mr McNerney or Steve Filson). As Pete McCloskey tells the voters, “Congressmen are like diapers. You need to change them often, and for the same reason.� © 2006 .  fuel dispenser About sponsorship The Iowa governor s race Exalting the e-word Jun 1st 2006 | IOWA CITY From The Economist print edition Wh fuel dispenser y a bunch of hopeful Democrats are keener on corn than ever THESE are active times in Iowa, the deep purple and bucolic state that, once every four years, becomes an early- warning device for America s presidential politics. Five candidates, four of them Democrats, are eager to replace Tom Vilsack, a popular two-term governor and also the only Democrat who is vacating a mansion this year. The primary is on June 6th. The candidates, though not considered exciting by local pundits, have plenty of experience between them. The sole Republican in the race, Jim Nussle, is an eight-term congressman and chairman of the House Budget Committee who has co-opted his only serious adversary, a hard-core conservative, by picking him as his running mate. The four Democrats are Chet Culver, Iow