K-GA44 FUEL DISPENSER

K-GA44 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset Function :Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose 4.5m

Weight 280kg

Dimension(L×W×H) : 1540*690*2210(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

e hydraulic pulse so as to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable --- pressure p fuel dispenser ulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pump inlet is not always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be brought two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more often. The Article 6.2.6 in GB50156-2002 the Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to re fuel dispenser duce pressure and electricity loss, and to decl fuel dispenser

　 The flexibility of the FTT network allows a wide variety of network topologies. The　　 physical topology installed has a direct effect on individual application node (or　　 nodes) resilience t fuel dispenser o cable breaks.　　 In the forecourt environment fuel dispenser application nodes require a large amount　　 of resilience. Depending on whether the cabling is being installed on a green field or　　 existing site (where existing cabling ducting has to be used) the use of local loop　　 junction boxes is recommended.　　3.4 Primary Junction Box　　 Echelon Corporation specify that in a FTT-10 LONWORKS�network there must be one　　 and only one terminator resistor. It is recommended that this 52.3 �resistor is placed　　 in a junction box called the Primary Junction Box. On any site network there must be　　 one and only one Primary Junction Box.　　Version 2.13 Page 3 of 24 December 2004　　IFSF ENGINEERING BULLETIN NO. 1 CABLES CABLING and CABLE CONNECTORS　　 The examples given in Appendix C clearly show the single Primary Junction Box in　　 each cabling topology containing the single terminator resistor.　　3.5 Secondary Junction Boxes　　 Please refer to reference Ref. 3 for information on Pass-Thru Stub and Local Loop　　 Junction Boxes. Local loop junction boxes should be used when high resilience is　　 required.　　4. CABLES　　4.1 Cable Specifications　　 Echelon Corporation have defined the electrical cable specifications of a LONWORKS　　 FTT network. These specifications are listed in Tables A.1.2 and A.1.3 of Appendix　　 A.　　 Cable used in a service station forecourt should not only meet all the Echelon　　 electrical specifications for a LONWORKS network but must also meet the national or　　 local requirements of statutory fire and safety fuel di fuel dispenser spenser

ere is an another approach, which has been tested with online sales of alcohol and pornography, and been found broadly to work. Internet gambling operations know more about their punters than casinos do. Owning a fuel dispenser credit card is a good proxy for proof of age; each transaction is logged, so companies can tell who is betting excessively or at odd times of the day; they can tell where a computer is, and so abide by state laws. Registered, branded, taxed gambling companies are not perfect protection against the excesses of betting, but they are the best there is. © 2006 .  About sponsorship Japan s economy Free at last Jul 20th 2006 From The Economist print edition Celebrate Japan s return to monetary normality, but don t forget the need for reform AT THE end of “Spirited Away� Hayao Miyazaki s animated masterpiece, ten-year-old Chihiro uses her wits and her courage to escape from a nightmarish world of ogres and witches. Japan enjoyed a similar deliverance last week, when its central bank turned its back on an interest rate of zero for the first time in almost six years. The quarter-point increase marked an end to the rich world s longest economic stagnation since the Great Depression. Throughout this 15-year ordeal, Japan has struggled with the difficult issue of what to jettison and what to cling on to. On the face of it, it looks as though the nation has preserved much of what made it different it has, for instance, held on to its preference for consensus and gradual change, to the dominance of the Liberal Democratic Party and to a business culture that shelters jobs. On closer examination, however, it becomes clear that the country has come a long way. Howl The economic and human cost of the lost years was huge. Before the 1990 collapse of its property and stockmarket bubbles, Japan was the envy—and the fear—of the West. But the combina fuel dispenser tion of success and cheap capital that fu fuel dispenser