U103-A Filter

U103-A Filter

This device is mainly applied in the system of dispenser to remove the solid sedimentation is the oil ,ensuring the cleaning of the oil or like ,and as a result to extend the life span and accuracy of the flow meter. In the system of dispenser ,it is fixed between the oil pump and the flow meter.

Materials:

Body: Body: Aluminum (Spray-Painted)

Seals: Buna-N

Technical Specifications:

Working pressure:0.2Mpa

Filter accuracy:30um

Flow Rate:65L/min

Rating Medium:Gasoline,Kerosene, Diesel

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U103-A 2kg/case of1 2.2kg/case of1 20x13x14cm/case of1

Qv── flowage passed over in fuel dispenser (L/min.) t── measuring time (s) Pu── unit price of oil (�L) Pj── money showed in display screen (� Pc── due sum (� EVmax── the maximum value of relative error measured under regulating flow rate;(%) Evmin──the minimum value of relative error measured under regulating flow rate;(%) En──repeatability of measurement (%) EP──error of paid sum 3.2 Determination of testing results Error Ev, Repeatability of measurement En and Due sum error Ep comes out after calculating testing data. The largest value of Error Ev in testing is regarded as the basic error of fuel dispenser according to the regulation of JJG443-98. The larger value of Repeatability of measurement En in two flow rate testing presents the repeatability of fuel dispenser. Error Ev should be 0.3%, repeatability of measurement no more than 0.15%, if beyond these scopes testing would be determined as unqualified. The contents of money indication and money error are not regula fuel dispenser ted in the approval procedure of JJG443-98. There would exist a little error after long refueling because usually the calculation of paid money adapts the round –mode. Example of indicating valve appraisal Take an appraisal of fuel dispenser 6~60L/min for example, it is usually adapted non-presetting mode in filing station. Setting unit price as 2.75�L and preparing metal standard measurer of 100L, conduct 3 tests as maximum flow rate 60L/min and minimum flow rate 12L/min, respectively. Testing result is listed in Table 6-1. Tabl fuel dispenser e 6-1 Appraisal Results Article IV Important notices in appraisal Indicating value appraisal is crucial part of fuel dis fuel dispenser penser’s testing items, which is direct foundation to determine the accuracy and qualification of fuel dispenser. The appraisal method and data processing introduced in Article III is based upon JJG443-98. Filling station should consult the above procedure and conduct self appraisal in accordance with relative requirements o

s　　 3 bin8 R(1-9) M　　 (03H) (1-8) W(1-2)　　 Number of washing modes defined (Default =1).　　 0 = not configured　　 n = number of washing modes　　 Please note that CW s that do not permit the　　 NumberOfWashingModes to be changed remotely should:　　 - Reject any write attempts with a Data_ACK value of 2　　 (Read OnlyNot Writable).　　 - Must set the NumberOfWashingModes to the value of　　 washing modes that is hard coded in their program.　　 When a master resetcold start occurs on the CW it must　　 reset this DataID to its default value.　　Version 1.33 IFSF - STANDARD FORECOURT PROTOCOL September 2005　　 fuel dispenser CAR WASH SPECIFICATION　　Page: 28 of 65　　 NumberOfCWPs　　 5 bin8 R(1-9) M　　 (05H) (1-15) W(1-2)　　 Number of car washing points controlled by the CWC　　 (default=1).　　 0 = not configured　　 n = number of car washing points　　 Please note that CW s that do not permit the　　 Numb fuel dispenser erOfCWPs to be changed remotely should:　　 - Reject any write attempts with a Data_ACK value of 2　　 fuel dispenser (Read OnlyNot Writable).　　 - Must set the NumberOfCWPs to the value of washing　　 points that is hard coded in their program.　　 When a master resetcold start occurs on the CW it must　　 reset this DataID to its default value.　　

me 170 of India s 602 districts—a “red corridor�down a swathe of central India from the border with Nepal in the north to Karnataka in the south and covering more than a quarter of India s land mass. This statistic overstates Naxalite power, since in most places they are an underground, hit-and-run force. But in the Bastar forest they are well-entrenched, controlling a large chunk of territory and staging operations across state borders into Andhra Pradesh and Orissa. In the tiny, dirt-poor villages scattered through the forest, the Indian state is almost invisible. In one there is a hand-pump installed by the local government, but the well is dry. There are no roads, waterpipes, electricity or telephone lines. In another village a teacher does come, but, in the absence of a school, holds classes outdoors. Policemen, health workers and officials are never seen. The vacuum is filled by Naxalite committees, running village affairs and providing logistic support to the fighters camping in the forest fuel dispenser . For the past year, those fighters—mostly local tribal people—have been battling not just the police and the six paramilitary battalions deployed in the district, but their own neighbours. Not a dinner party The single spark that lit this prairie fire was the formation a year ago of Salwa Judum, an anti-Maoist movement, whose name in Gondi, the language spoken by local tribes, means something like “peace hunt� Its origins are disputed. K.R. Pisda, the district collector, or senior official, in Dantewada, dates it to a me fuel dispenser eting in June 2005 of local villagers fed up with Naxalite intimidation and extortion. Others say that the Maoists were en fuel dispenser forcing a boycott of trade in one of the main local forest products tendu patta, the leaves used to wrap bidis (hand-rolled cigarettes). Similar boycotts in the past had succeeded in forcing up prices and had earned the Naxalites some kudos. This one, the story goes, backfired. If it ever was a spontaneous movement, Salwa Judum soon