U203-E Display

U203-E Display

This device is mainly applied in the system of dispenser to remove the solid sedimentation is the oil ,ensuring the cleaning of the oil or like ,and as a result to extend the life span and accuracy of the flow meter. In the system of dispenser ,it is fixed between the oil pump and the flow meter.

Materials:

Body: Body: Aluminum (Spray-Painted)

Seals: Buna-N

Technical Specifications:

Working pressure:0.2Mpa

Filter accuracy:30um

Flow Rate:65L/min

Rating Medium:Gasoline,Kerosene, Diesel

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U103-A 2kg/case of1 2.2kg/case of1 20x13x14cm/case of1

cation, the two categories of mechanism are adopted according to varied needs. COS security system COS safety system mainly consists of three sections: Safety state: current safety classification of card, which is used for judging holder whether or not has right to operate. Before power of IC card being connected, COS just has the minimum right to operation. Only pass authentication, like password verification and interactive authentication, can access to higher rights. Safety state is stored and indicated in special memory. Security attribute: every file has a corresponding requirement whether or not conduct an operation. Only security state meets file’s needs, operation concerned can be conducted. Therefore, securit fuel dispenser y attribute is also called operation purview. When prepare to conduct an item of operation, system would automatically inspect current security classification whether or not meet requirement of purview. Security mechanism: based upon above security structure, it is needed to establish a security mechanism to interchange safety state, so that connecting safety state and security attribute. In other words, make valid user holding relevant operating right, and hinder illegal user. Generally, the transformation of safety state includes password verification, a fuel dispenser uthentication, encryption /decryption.etc. PIN authorization Verifying PIN, like using bank card, terminal transmit password into IC card, in which being compared with the password stored in secret area. Card holder gets operation right if passwords are matched. If fail to match there are only three times to try. After three times card holder is supposed as illegal user, verifying PIN is closed. PIN authentication technology has a long history, which is only testify card holder whether or not know password, unable to testify he or she whether legitimate holder. Because of the shortcoming, a series of new authenticating technology have researched that employs human creation trait to distinguish personal identification. At prese fuel dispenser

8 W( ) M　　 Add_Recipient_Addr　　 (0BH) (1-255　　 Each recipient address is identified by 2 bytes:　　 1-127)　　 - Subnet = device type　　 - Node = 1 to 127　　 12 bin8 bin8 W( ) M　　 Remove_Recipient_Addr　　 (0CH) (1-255　　 Each recipient address is identified by 2 bytes:　　 fuel dispenser 1-127)　　 - Subnet = device type　　 - Node = 1 to 127　　4.5.1 Initial Node Installation　　 When first installing a device onto an IFSF network it is necessary to configure its　　 node address. This is done by activating an internal switch which sets the devices　　 Node address to 127. The Controlling Device then addresses the device with Node =　　 127 and assigns a new node number to Db_Ad 00H Data_Id 02H. Note that it is only　　 pos fuel dispenser sible to configure one device at a time.　　 In all other cases (i.e. except for node installation) the Local_Node_Address field is　　 read-only.　　 Note: In all circumstances the subnet address of the device (which is an implicit　　 characteristic of the device) in the Local_Node_Address field can never be changed it　　 is read only and not writeable.　　4.5.2 Recipient Address Table　　 Unsolicited messages are sent to all recipients that have requested to receive them.　　 A maximum number of 64 recipient addresses are necessary for this function (this is　　 the maximum number of nodes allowed o fuel dispenser

About sponsorship Overview Oct 19th 2006 From The Economist print edition Headline inflation eased in America, falling by 0.5% in September, thanks to a steep drop in energy prices. But consumer prices were still 2.1% higher than the year before, and core prices, excluding food and energy, rose by 0.2% last month and by 2.9% over the year, the quickest annual pace since 1996. The producer prices paid by companies fell by 1.3% in September. However, core producer prices increased by 0.6%. America s dour housing market perked up a little. Housing starts jumped by 5.9% in September compared with a 6% drop in August, though they were still 17.9% below their rate a year earlier. Confidence among fuel dispenser homebuilders rose after eight consecutive months of decline. The National Association of Home Builders Wells Fargo Housing Market Index increased by one point in October after falling to a 15-year low the month before. Industrial production in America declined by 0.6% in September. Spirits sank in Germany. The ZEW economic-sentiment indicator, based on a survey of analysts and institutional investors, fell by 5.2 points in October to �7.4, far below its historical average of 34. The ninth monthly fall in a row was attributed to fear of an American fuel dispenser slowdown, the threat of higher interest rates and the promise of heavier taxes. Industrial production in the euro area increased by 1.8% in August compared with the previous month, thanks to strong activity in Portugal, Luxembourg and Belgium. Year-on-year growth in industrial output increased to 5.4% in August from 3% in July. Annual inflation in the euro area was revised downwards from 1.8% to 1.7% in September, compared with 2.3% in August. Annual inflation in Britain declined to 2.4% in September, from 2.5% in the previous month, because of cheaper petrol prices. The unemployment rate increased to 5.5% in the three months to the end of August, up from 5.4% during the previous three months. Average pay, including bonuse fuel dispenser